Which can be supply in different finishes depending on its utilization. Interiors: Honed, Polished and Aged. External: Cut, Sandblasted, Honed, Flamed and Bush hammered.
Each one of these finishes is obtained applying a process in where machinery and procedures of last technology are used, which it guarantees the good quality of all our products.
the floor has the impression of a worn look as if it has been used for years and has a natural patina from the start
By polishing a stone the colours are reinforced and the stone gets a reflecting surface with a high gloss. The degree of polish of the natural stone is mainly determined by the degree of polish of its mineral elements and by its texture.
Therefore not every natural stone can be polished. But it’s perfectly usable for wall covering and all sorts of cut to size.
This kind of finish is the most recommendable and is applied in internal flooring in natural stone.
The look of the manufactured surface depends on the number of pointy bulges on the hammer. The distance between the small numerous pits depends on the distance in between the points.
If done mechanically the pits are spread evenly on the whole surface.
Semi rough finish which feels very natural, easy maintenance and less sensitive to scratches.
The floor is antislip, but you can walk on it barefoot, easy to maintain and less sensitive to scratches.